• Categories
      No categories were found that matched your criteria.
      • Manufacturers
        No manufacturers were found that matched your criteria.
      • Products
        No products were found that matched your criteria.
          • Blog
            No blog posts were found that matched your criteria.

          Crystalline Waterproofing Compound (CWC):25Kg

          • Crystalline Waterproofing Compound
          • 25 kg
          • Water Proofing
          Manufacturer: CHEMBOND
          Delivery date: 1-2 days
          NRs 4,500
          NRs 5,000
          bag

          Description

          KEM Proof CWC is an integral capillary concrete waterproofing compound which waterproofs and protects concrete in depth. It consists of Portland cement, specially treated quartz sand and specially chemicals.

          Uses

          • Basements and foundations
          • Tunnels and subways
          • Sewage and water treatment Plants:
          • Dams and reservoirs
          • Concrete pipes.
          • Harbours and bridges
          • Parking areas

          Advantages

          • Ease of application
          • Penetrates deeply and seals concrete capillary tracts and shrinkage cracks
          • Applicable for either positive or negative side

          Pressure

          • Effective under high hydrostatic Pressure.
          • Tear or puncture resistant
          • Does not require protection
          • Withstands aggressive saline or chemical attack

          Typical Properties

          Penetration: 2mm per week

          Curing: Damping for 5-7 days by mist spraying water and covering with polythene sheets

          Standards: DIN 1048

          Direction for use

          Clean the surface to be treated and free it from laitance, loose material, dust, dirt, oil, grease, general grime, all contaminants etc. Repair and treat all structural cracks property Fill all non-structural cracks more than 1mm width Fill any holes or indentations with repair mortar. Remove all renders, coatings, tiling from the structure to be waterproofed Rake out any loose pointing and reprinted flush with the surface of the bricks or block work. Coat newly laid concrete after 24 hours. Treat leaking construction joints with KEM plug and seal with KEM seal before applying coat. Add 2 parts water to 5 parts KEM Proof CWC Apply the material within 20 minutes using a brush. Stir the mix frequently throughout application. Apply a second coat at right angle to the first coat after 3-4 hours. Keep the treated area damp for five days.

           

          Coverage: 1 kg/m²/coat when used alone or for dry shake broadcast

          Packaging: 25 kg moisture-resistant bags

          Storage and Shelf life: Away from direct sunlight and moisture. 12 months from manufacture if stores in original, unopened bags in dry conditions

          Technical Service

          Chembond has established itself in various fields on the basis of its dependable technical service. For this purpose, we maintain a well-equipped laboratory for research & quality assurance of all products Our experienced personnel are always on call and would always be available for product demonstrations and product performance monitoring

          Safety precautions

          Do not use any curing compounds. KEM Proof CWC is a cementitious alkaline product. Care should be taken to avoid contact with eyes, skin.

          There are no reviews yet

          Add your review
          back to top